2025 Grasshopper FrontMount™ 900 Series 940 EFI 72"

Information

2025 Grasshopper FrontMount™ 900 Series 940 EFI 72"

Delivering powerful, high-tech performance and unparalleled fuel economy, the Grasshopper Model 940 EFI riding lawn mower with zero-turn maneuverability features an Electronic Fuel Injection (EFI) engine with Electronic Throttle Control (ETC) that maximizes fuel efficiency. The PowerFold® deck lift/electric height adjustment of the out-front deck raises the deck to a near vertical position for easy cleaning. The deck can be replaced with several grounds-maintenance implements.

Features may include:

QuikConverter™ Implement Capability
  • Add or remove implements in minutes without tools with QuikConverter™ Implement System
  • Equip your out-front mower with a wide range of tools, including turf cleanup, renovation and snow removal implements that extend your productivity year-round
Minimal Maintenance
  • Fewer than 10 grease points and easy top-side access to belts and filters
  • 1,000-hour transmission fluid change intervals
  • Self-tensioning belts minimize cost and labor on routine maintenance
PowerFold® Electric Deck Lift
  • Standard on all FrontMount™ DuraMax® decks, PowerFold® is the zero-turn mower industry's first electric deck lift (introduced in 2004).
  • PowerFold® rotates the deck nearly 90 degrees to provide easy access to the underside of the deck for simplified maintenance and mulching package installation, plus space-saving portability and storage.
  • The feature also adjusts cutting height between 1.25 and 5.0 inches and controls deck lift functions using a single switch.
Vigilant Operator Presence System™
  • Standard, low profile Roll-over Protection System (ROPS) structure with an adjustable seatbelt
  • Dampened steering levers that return to neutral from forward and reverse
  • Interlock switches that shut down the engine when the operator leaves the seat while PTO is engaged or levers are in drive position
Heavy-duty Deck
  • Extra-deep, 5.5-inch deck is fabricated from heavy-gauge formed steel with a reinforced anvil edge
  • Specially designed cutting chambers enhance airflow for better cut quality
  • Deck easily converts from side discharge to optional Down Discharge™ mulching or PowerVac™ collection
  • Sentry™ spindles with massive, 8-inch flanges anchored in a 6-bolt pattern, spread the force of impact for greater strength
  • Spindle planes are fabricated from double-layered formed steel laminate and combine with the spindles to form a triple-strength deck to keep blades level and deliver a high-quality cut.
  • Sentry™ spindle guards shield spindle housing and seal lower bearings from fiber wrap and dirt ingestion

Photos

Highlights

  • Donna, Texas
  • 2025
  • Grasshopper
  • FrontMount™ 900 Series 940 EFI 72"
  • Rugged, design-matched G3 hydrostatic system with auxiliary cooling fans, HydroGear variable displacement 21 cc piston-type pumps and Parker/Ross wheel motors.
  • Gasoline - unleaded
  • Available
  • (Side Discharge): 85.5 in. (227.3 cm) | (Mulch): 73.5 in. (186.7 cm) | FrontMount PowerUnit Only: 53.0 in. (134.6 cm)
  • CUTTING RANGE: 1.25 to 5.0 in. (3.2 cm to 12.7 cm) | (Seat Back): 47.0 in. (119.4 cm) | (Seat Cushion): 31.5 in. (80.0 cm) | (ROPS): 69.5 in. 176.5 cm)

Specifications

  • 2025
  • Grasshopper
  • FrontMount™ 900 Series
  • 940 EFI 72"
  • Zero-Turn Mower
  • Vanguard Big Block EFI, V-twin with Electronic Throttle Control
  • 60.6 cu. in. (993 cc)
  • Pressure Lube/Filter
  • Air
  • Heavy-duty, remote mounted, cyclonic, dual element air filtration.
  • Solenoid shift
  • Breakerless
  • Gasoline - unleaded
  • InFrame™ suspension
  • Rugged, design-matched G3 hydrostatic system with auxiliary cooling fans, HydroGear variable displacement 21 cc piston-type pumps and Parker/Ross wheel motors.
  • One- or two-hand operation with adjustable HydraSmooth™ QuikAjust Tilt™ dual levers with 9-inch adjustment for a custom fit that automatically return to neutral from either forward or reverse position.
  • Dynamic braking through hydrostatic transmission.
  • Disc parking brakes, one for each drive wheel.
  • 24x12x12 bar tread, high flotation, 4-ply rated
  • 13x6.50x6 rib tread, pneumatic, 4-ply rated
  • 12 Volt
  • 0 - 11.0 mph (0 - 17.7 kph) forward 0 - 6.0 mph (0 - 9.7 kph) reverse
  • BLADES (Tempered, alloy steel): 25 in. (63.5 cm) | Deck: 12.25 in. (31.1 cm)
  • CUTTING RANGE: 1.25 to 5.0 in. (3.2 cm to 12.7 cm) | (Seat Back): 47.0 in. (119.4 cm) | (Seat Cushion): 31.5 in. (80.0 cm) | (ROPS): 69.5 in. 176.5 cm)
  • 8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
  • True zero degree, turns within own length with counter-rotating, independently powered drive wheels. Seat is pivot point.
  • (frontmount w/ DuraMax® Deck - Mowing Position): 120.5 in. (306.1 cm) | (FrontMount Power Unit + DuraMax® Deck - Folded Up): 107.0 in. (271.8 cm) | FrontMount PowerUnit Only: 70.0 in. (177.8 cm)
  • (Side Discharge): 85.5 in. (227.3 cm) | (Mulch): 73.5 in. (186.7 cm) | FrontMount PowerUnit Only: 53.0 in. (134.6 cm)
  • 54.5 in. (138.4 cm)
  • 14.4 U.S. Gal. (54.61 l)
  • (Uncrated): 1685 lbs. (764.3 kg) | FrontMount Power Unit Only (uncrated): 1140 lbs. (517.1 kg) | FrontMount Deck Only - Side Discharge (uncrated): 545 lbs. (247.2 kg) | Mulching Package: 50 lbs. (22.7 kg)
  • Crankshaft: Horizontal | Muffler: Ultra quiet, single, industrial type | BLADE DRIVE: Maintenance-free gearbox with single Kevlar V-belt and idler arm tensioning. | Interlock System: Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral. | Console-mounted Instruments: Low engine oil pressure, engine code light and parking brake warning lights, electronic fuel gauge/hour meter, two USB charging ports, work light, ignition and push/pull PTO switches. | Filtration/Hydro Fluid: Integrated, replaceable, high-efficiency, fine-particle filter / Grasshopper CoolTemp Hydro-Max™ fluid withstands high and low temperature extremes for 1,000 hour change intervals. | Attachment Drive: Telescoping PTO shaft with two high-speed U-joints, Quik-D-Tatch® coupler and heavy-duty electric Mag Stop® blade clutch/brake.
  • Tubular 2.25 in. x 4 in. boxed members with 0.25 in. gussets. Formed double thickness hardened steel (0.269 in. 7.6% thicker than 0.25 in. (6.35 mm)) truss spindle plane and (3) Sentry™ spindles and a triple-strength upper deck, 1/2 inch thick in stress zones. Geometrically engineered design with 7 gauge skirts to withstand the brunt of commercial mowing.
  • Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
  • Grammer Premier suspension seat provides the ultimate in operator comfort. Low-profile seat slides fore and aft and includes an integrated shock absorber that manually adjusts to operators between 100 - 300 lbs. Other ergonomic features include a backrest that tilts from -5 degrees to +30 degrees, a lumbar support mechanism, adjustable armrests and a retractable seat belt.